Aerial insulated cable
Aerial insulated cable of the rated voltage 0.6/1kV
Product standard
- The product is manufactured according to the standards of GB12527-90“Aerial insulated cables of rated voltages up to and including 0.6/1kV” andIEC60502“Extruded solid dielectric power cables for rated voltages from 1kV to30 kV”.
Operating characteristics
- Rated voltage Uo/U is 0.6/1kV.
- Max. Permissible continuous temperature:
PVC、PE insulated aerial cables: 70;
XLPE insulated aerial cables: 90.
- Max. Short-circuit temperature of the conductor (max. continuous time is not
More than 5s)shall not exceed:
PVC insulated aerial cables:160;
PE insulated aerial cables:130;
XLPE insulated aerial cables: 250.
- The installation ambient temperature should not below -20.
- The bending radius of cables is recommend as follows:
When the diameter of cables less than 25 mmnot less than 4 times the diameter of cables;
When the diameter of cables not less than 25 mm:not less than 6 Times the diameter of cables.
- When the cables use in alternating current systemrated voltage of cables
Should be at least equal to that of the system;
When the cables use in direct current systemrated voltage should not be
More than 1.5 times of the rated voltage of the cables.
Type, Description and Product Range of Cable:
|
Type |
Description |
Core No |
Rated voltage kv
|
Nominal cross-section of Conductor mm2 |
|
JKYJ |
Copper conductor XLPE insulated aerial cables |
1 |
10
|
10~300
|
|
JKLYJ |
Aluminum conductor XLPE insulated aerial cables |
|||
|
JKY |
Copper conductor PVC insulated aerial cables |
|||
|
JKLY |
Aluminum conductor PVC insulated aerial cables |
|||
|
JKLYJ/Q |
Aluminum conductor light PVC insulated aerial cables |
|||
|
JKLY/Q |
Aluminium conductor light PVC insulated aerial cables |
1~4 cores
- Used for aerial electric power
- Transmission and distribution lines in city
- With thick population, buildings and